The BOLTANCHOR Self-Drilling Anchor is a unique anchoring system and is today’s answer to the increasing demands of the tunnelling industry and ground engineering for safer and faster production. The system provides advantages for all areas of its applications, where boreholes would require the time consuming drilling with casing systems in unconsolidated or cohesive soil.
The BOLTANCHOR Self-drilling anchor (SDA)™ is a bolting solution for unstable ground conditions such as sand, gravel, silt, and clays, and in soft to medium fractured rock formations. For projects facing such ground conditions, BOLTANCHOR SDA self-drilling anchors should be considered as the main productivity solution. The BOLTANCHOR SDA solution is designed for optimized installation, tailored to the project’s needs.
Sacrificial drill bits
The sacrificial drill bit is the most crucial part of the anchoring system and is responsible for the productivity of the installation. BOLTANCHOR offers a large range of drill bits to suit the changing geology encountered during projects. In order to improve on performance and cost efficiency, data is collected from projects around the world and incorporated into the design with the goal to improve penetration rate and bit quality and to reduce manufacturing and application costs.
The selection of drill bits
A successful installation of the SDA system depends on the selection of the most suitable drill bit. Compared to conventional drill bit types offered globally for maximum standing performance for rock or soil.
Pattern Injecting Machine
The new pattern injecting machine with characteristics of high pressure, thick grout and large discharge, which is developed by partner company , takes the advanced technology of pressurized screw rod applied in Europe and America, guaranteeing full grouting in injecting hole without intrusion of air.
Thus the en-durability of structure is ensured, improving the quality of project. And water ratio is the intrinsic reason to cause unsaturated grouting, so many specifications and requirements concerning this are presented in order to realize full degree of grouting.
Based on improvement and practice, thick mortar with water ratio of 0.30:1 is available. Meanwhile this grouting machine can be fitted with injector, which can make a spraying on ground floor of various walls and finish coat.
